|
|
Post by hudson43 on Nov 3, 2021 22:31:42 GMT
Hi
i have acquired a 1945 new Hudson auto cycle, it’s been stood for a long time and i am going to strip the carb down tomorrow to give it a good clean….it’s fitted with a v508c carb….is this correct !
|
|
|
|
Post by davwat on Nov 3, 2021 22:44:34 GMT
Hi i have acquired a 1945 new Hudson auto cycle, it’s been stood for a long time and i am going to strip the carb down tomorrow to give it a good clean….it’s fitted with a v508c carb….is this correct ! If it looks like this it is correct! |
|
|
|
Post by davwat on Nov 3, 2021 23:05:20 GMT
Hi i have acquired a 1945 new Hudson auto cycle, it’s been stood for a long time and i am going to strip the carb down tomorrow to give it a good clean….it’s fitted with a v508c carb….is this correct ! And yes to V508C. |
|
|
|
Post by hudson43 on Nov 4, 2021 9:21:45 GMT
Thank you daywat, I am going to strip the carb down today and have a look if it’s all ok
|
|
|
|
Post by davwat on Nov 4, 2021 10:00:13 GMT
Hi i have acquired a 1945 new Hudson auto cycle, it’s been stood for a long time and i am going to strip the carb down tomorrow to give it a good clean….it’s fitted with a v508c carb….is this correct ! And yes to V508C. |
|
|
|
Post by davwat on Nov 4, 2021 10:02:16 GMT
Jet 7J
Needle 2
|
|
|
|
Post by hudson43 on Nov 4, 2021 11:26:23 GMT
Thanks for the info Davwat, I have cracked the carb open and the Carburettor Taper Needle Adjuster is missing from the top of the slide…I can find one for sale on the internet for a seagull marine Villiers carb, I wonder if it’s the same spec ! |
|
|
|
Post by hudson43 on Nov 4, 2021 11:29:08 GMT
|
|
|
|
Post by davwat on Nov 4, 2021 12:26:29 GMT
Thanks for the info Davwat, I have cracked the carb open and the Carburettor Taper Needle Adjuster is missing from the top of the slide…I can find one for sale on the internet for a seagull marine Villiers carb, I wonder if it’s the same spec ! If? it is just the screw you need, I will send you one of them. |
|
|
|
Post by hudson43 on Nov 4, 2021 14:09:50 GMT
Hi davwat, yes it’s just the screw that locates in the top of the slide, the adjust the needle setting and retains it,it would be fantastic if you could send me one !
|
|
