tony1
New Member
Posts: 14
|
Post by tony1 on May 27, 2021 7:41:14 GMT
Please tell me how to wire this stator, more importantly which pieces need to be isolated, any help will be greatly appreciated
|
|
|
Post by JamesCentral on May 27, 2021 9:51:29 GMT
You haven't said what it's from and even the bigger photo is a bit small to see what's going on... So, I'm assuming that under the insulating tape, that black wire is connected to the capacitor and the yellow wire; the other end needs to be connected to the spring of the contact breaker, but insulated from the body of the contact breaker - it looks as if the insulating bush is there, in which case you just need the screw and nut to hold it all together. There should be a wire coming from the bottom coil - that just connects to the lights.
|
|