|
Post by shepped0 on Feb 17, 2023 15:31:44 GMT
Is this the 2 marks i am looking for ?
|
|
|
Post by davwat on Feb 17, 2023 20:11:13 GMT
Is this the 2 marks i am looking for ? Yep on the right track, the piston should be at Top Dead Centre.
Having said that! it would of been accurate when it left the factory in 1938 however who knows if that flywheel is the original to that engine, if it's an original mark and the points are set at 15thou.
Have a check and see if the piston is at TDC ? I've been a bit buzzy with other things this week and haven't been near the workshop, do let me know how you get on and if it looks out I can do a bit of a tutorial on how I set mine up, you can then back track and see if the mark on the flywheel is right.
|
|
|
Post by shepped0 on Feb 18, 2023 19:42:41 GMT
Is this the 2 marks i am looking for ? Yep on the right track, the piston should be at Top Dead Centre.
Having said that! it would of been accurate when it left the factory in 1938 however who knows if that flywheel is the original to that engine, if it's an original mark and the points are set at 15thou.
Have a check and see if the piston is at TDC ? I've been a bit buzzy with other things this week and haven't been near the workshop, do let me know how you get on and if it looks out I can do a bit of a tutorial on how I set mine up, you can then back track and see if the mark on the flywheel is right.
|
|
|
Post by shepped0 on Feb 18, 2023 19:43:25 GMT
Thanks for that will get on to it in the next couple of day
|
|
|
Post by shepped0 on Mar 4, 2023 16:24:06 GMT
Hi All
Sorry for my late reply I have successfully got it going and sounding good Thank you for all your replies it was the timing as indicated Kind Regards David
|
|