|
Post by moby54 on Apr 2, 2021 7:25:46 GMT
I have recently rebuilt a 1967 RM 11 up the bike as good compression.new coil fitted points condenser.timing spot on new carb.but difficult to start (drill usage) new clutch fitted but the bikes gutless cleaned exhaust out and drilled baffles out to 8mm.new drive belt fitted.these bikes are supposed to be very quick I am told.but performance is absolutely diabolical.only getting about 25mph on the. Flat.and much pedal assistance needed on hills my friend as an rm12 and his goes really well.any suggestions gents.thanks in advance John.
|
|
|
Post by barrybubble on Apr 2, 2021 8:14:18 GMT
When you say new carb, what is it? Not an H14.
|
|
|
Post by moby54 on Apr 6, 2021 15:27:58 GMT
Hi Barry no it's an AR12.i have also tried a SHA dellorto.14/15 an also a gurtner AR13.
|
|